Brocade Error Message Reference Guide v6.0.0 (53-1000600-01, April 2008)

Fabric OS Message Reference 185
53-1000600-01
FW-1131
29
FW-1131
Message <timestamp>, [FW-1131], <sequence-number>,, INFO, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of zone changes has risen above the high boundary. Zone changes occur
when there is a change to the effective zone configuration.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1132
Message <timestamp>, [FW-1132], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of zone changes has changed from a value outside of the acceptable
range to a value within the acceptable range. Zone changes occur when there is a change to the
effective zone configuration.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1133
Message <timestamp>, [FW-1133], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of fabric logins has changed. Fabric logins occur when a port or device
initializes with the fabric. The event is called a fabric login or FLOGI.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO