Brocade Error Message Reference Guide v6.0.0 (53-1000600-01, April 2008)

Fabric OS Message Reference 213
53-1000600-01
FW-1313
29
FW-1313
Message <timestamp>, [FW-1313], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of simple network management protocol write (WSNMP) violations has
fallen below the low boundary. WSNMP violations indicate that an SNMP “get/set” operation
request has been received from an unauthorized IP address.
Recommended
Action
No action is required.
Severity INFO
FW-1314
Message <timestamp>, [FW-1314], <sequence-number>,, WARNING, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of simple network management protocol write (WSNMP) violations has
risen above the high boundary. WSNMP violations indicate that an SNMP “get/set” operation
request has been received from an unauthorized IP address.
Recommended
Action
Run the errShow command to determine the IP address that sent the request. Responses to
security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
Severity WARNING
FW-1315
Message <timestamp>, [FW-1315], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of simple network management protocol write (WSNMP) violations has
changed from a value outside of the acceptable range to a value within the acceptable range.
WSNMP violations indicate that an SNMP “get/set” operation request has been received from an
unauthorized IP address.
Recommended
Action
No action is required.
Severity INFO