Brocade Error Message Reference Guide v6.0.0 (53-1000600-01, April 2008)

Fabric OS Message Reference 287
53-1000600-01
Chapter
42
ISNS System Messages
ISNS-1001
Message <timestamp>, [ISNS-1001], <sequence-number>,, INFO, <system-name>, Configuration
peering with external iSNS server <New config iSNS server IP address> slot/port
<New config Slot number>/ge<New config port number> (current <Current iSNS server
IP address> <Current slot number>/ge<Current port number>).
Probable Cause Indicates that the user has issued the isnscCfg command.
Recommended
Action
No action is required.
Severity INFO
ISNS-1002
Message <timestamp>, [ISNS-1002], <sequence-number>,, INFO, <system-name>, Start peering
with external iSNS server <iSNS server IP address> slot/port <Slot number>/ge<Port
number>.
Probable Cause Indicates that peering has started with the specified external internet storage name service (iSNS)
server.
Recommended
Action
No action is required.
Severity INFO
ISNS-1003
Message <timestamp>, [ISNS-1003], <sequence-number>,, INFO, <system-name>, Peering with
external iSNS server is disabled.
Probable Cause Indicates that the IP address of internet storage name service (iSNS) server is set to zero, so
peering is disabled.
Recommended
Action
If you wish to enable the iSNS server, use the isnscCfg command to show or set the server IP
address; otherwise, no action is required.
Severity INFO