Brocade Error Message Reference Guide v6.0.0 (53-1000600-01, April 2008)

464 Fabric OS Message Reference

53-1000600-01

TS-1006

Message <timestamp>, [TS-1006], <sequence-number>,, INFO, <system-name>, <message>

Probable Cause Indicates that a time service event is occurring or has failed. The message might be one of the

following:

• Init failed. Time Service exiting

Probable Cause: Initialization error, Time Server exits.

• Synchronizing time of day clock

Probable Cause: Usually logged during temporary operational issues when the clock goes out

of synchronization: For example, when a time update packet is missed due to fabric

reconfiguration or role change of the principal or primary fabric configuration server (FCS)

switch. If the message does not recur, it should be ignored.

• Validating time update

Probable Cause: Usually logged during temporary operational issues when a time update

packet cannot be validated in a secure fabric. For example, during fabric reconfiguration or role

change of the primary FCS switch. If the message does not recur, it should be ignored.

Recommended

Action

No action is required.

Severity INFO

TS-1007

Message <timestamp>, [TS-1007], <sequence-number>,, WARNING, <system-name>, <message>

Probable Cause Indicates that a switch is trying to set the tsclockserver, which is not the primary fabric

configuration server (FCS) across the fabric. A consistent FCS policy must be implemented across

the fabric.

Recommended

Action

Verify that the FCS policy is consistent across the fabriclog_ts.xml.

Severity INFO