Brocade Error Message Reference Guide v6.0.0 (53-1000600-01, April 2008)

484 Fabric OS Message Reference

53-1000600-01

ZONE-1026

Message <timestamp>, [ZONE-1026], <sequence-number>,, INFO, <system-name>, port <port

number>

Out of CAM entries.

Probable Cause Indicates that the total number of S_ID entries while creating or adding a zone group exceeds the

limit.

Recommended

Action

If hardware zoning enforcement is preferred, edit the zoning database to have zoned PIDs for that

port.

Severity INFO

ZONE-1027

Message <timestamp>, [ZONE-1027], <sequence-number>,, INFO, <system-name>, Zoning

transaction aborted <error reason>. <AD Id>.

Probable Cause Indicates that the zoning transaction was aborted due to a variety of potential errors. The error

reason variable can be one of the following:

• Zone Merge Received: The fabric is in the process of merging two zone databases.

• Zone Config update Received: The fabric is in the process of updating the zone database.

• Bad Zone Config: The new config is not viable.

• Zoning Operation failed: A zoning operation failed.

• Shell exited: The command shell has exited.

• Unknown: An error was received for an unknown reason.

• User Command: A user aborted the current zoning transaction.

• Switch Shutting Down: The switch is currently shutting down.

Recommended

Action

Many of the causes of this error message are transitory: for example because two admins are

working with the zoning database concurrently. If you receive this error, wait a few minutes and try

again. Verify that no one else is currently modifying the zone database.

Severity INFO