Brocade Error Message Reference Guide v6.0.0 (53-1000600-01, April 2008)

486 Fabric OS Message Reference
53-1000600-01
ZONE-1031
80
ZONE-1031
Message <timestamp>, [ZONE-1031], <sequence-number>,, ERROR, <system-name>, Switch is in
interop mode. (switch, port) members not supported.
Probable Cause The switch is set to interop mode using the interopMode command. Interop mode does not allow
<domain, portarea> members in the active zone database.
Recommended
Action
Remove all <domain, portarea> members from the zone database, or convert them to world-wide
name (WWN) zoning.
Severity ERROR
ZONE-1032
Message <timestamp>, [ZONE-1032], <sequence-number>,, ERROR, <system-name>, Domain
<domain number> Max Zone DB size <max zone db size>.
Probable Cause Indicates that the specified domain does not have enough memory for the zone database being
committed.
Recommended
Action
Reduce the size of the zone database and retry the operation.
Severity ERROR
ZONE-1033
Message <timestamp>, [ZONE-1033], <sequence-number>,, ERROR, <system-name>, Domain
<domain number> Lowest Max Zone DB size.
Probable Cause Indicates that the specified domain has the lowest memory available for the zone database in the
fabric. The zone database must be smaller than the memory available on this domain.
Recommended
Action
Reduce the size of the zone database and retry the operation.
Severity ERROR