Manualshelf

Brocade Error Message Reference Guide v6.0.0 (53-1000600-01, April 2008)

ManualsBrandsHP ManualsStorageHP SN8000B 8-slot Power Pack+ SAN Backbone Director Switch
51525354555657585960
Fabric OS Message Reference 5
53-1000600-01
Viewing and Configuring System Message Logs
1
TABLE 2 Commands for Viewing or Configuring the System Parameters and Logs
Command Description
agtCfgDefault Resets the SNMP recipients to default values.
agtCfgSet Modifies the SNMP agent configuration.
agtCfgShow Displays the current SNMP agent configuration.
auditCfg Configures the audit message log.
auditShow Modifies and displays audit log filter configuration.
diagPost Set or display diagnostic POST (Power-On Self-Test) configuration.
errClear Clears all error log messages for all switch instances on this control
processor (CP).
errDelimterSet Sets the error log start and end delimiter for messages pushed to the
console.
errDump Displays the entire error log, without page breaks. Use the -r option to
show the messages in reverse order, from newest to oldest.
errFilterSet Sets an error severity filter for the system console.
errShow Displays the entire error log, with page breaks. Use the -r option to show
the messages in reverse order, from newest to oldest.
pdShow Displays the contents of the panic dump and core dump files.
portErrShow Displays the port error summary.
portLogClear Clears the port log. If the port log is disabled, this commands enables it.
portLogDisable Disables the port log facility.
portLogDump Displays the port log, without page breaks.
portLogDumpPort Displays the port log of the specified port, without page breaks.
portLogEventShow Displays which port log events are currently being reported.
portLoginShow Displays port logins.
portLogPdisc Sets or clear the debug pdisc_flag.
portLogReset Enables the port log facility.
portLogResize Resizes the port log to the specified number of entries.
portLogShow Displays the port log, with page breaks.
portLogShowPort Displays the port log of specified port, with page breaks.
portLogTypeDisable Disables an event from reporting to the port log. Port log events are
described by the portLogEventShow command.
portLogTypeEnable Enables an event to report to the port log. Port log events are described
by the portLogEventShow command.
setVerbose Sets the verbose level of a particular module within the Fabric OS.
supportFtp Sets, clears, or displays support FTP parameters or a time interval to
check the FTP server.