Brocade Network Advisor 12.1.X Documentation Updates (53-1003016-05, January 2014)

1428 Brocade Network Advisor SAN User Manual
53-1002948-01
Database tables and fields
H
TABLE 282 PHYSICAL_INTERFACE
Field Definition Format Size
INTERFACE_ID Primary key for this table. int
PHYSICAL_PORT_ID Foreign key which refers PHYSICAL_PORT table. int
SPEED_IN_MB Interface speed in Mega Bytes. int
PHYSICAL_ADDRESS MAC address of this interface. varchar 64
LINK_ID Foreign key which refers LINK table. int
DUPLEX_MODE Interface duplex mode. Full/Half/Auto. smallint
IS_STACKING_INTERFACE This flag is to indicate whether the interface is
stacking interface or peri port. 0 indicates
non-stacking, 1-indicates stacking interface,
2-indicates peri port.
num (1,0)
IS_PORT_PRESENT This flag is to indicate whether the port is presented
in the device.
0 = Unknown
1 = Present
2 = Not present
int
PHYSICAL_DEVICE_ID For DCB switch, this is the core switch id.
For IP products, this is the physical_device_id in
physical_device table.
int
UNIT_NUMBER This is the unit number of which the interface is
located for IP stacking products.
If it is not applicable, the value is -1.
int
SLOT_NUMBER This is the slot number of which the interface is
located for the devices and switches.
If it is not applicable, the value is -1.
int
PORT_NUMBER This is the port number of the interface. int
PORT_TYPE This column is used to store the port type of the
interface. The value will be populated by the
NosSwitchAssetCollector during the discovery of the
VCS switch.The value of 0 means its edge port, and 1
means its trill port. Default value is 0.
smallint
UNIT_TYPE Indicates unit type in the stack. This column stores
the model type of a stackable unit such as
"ICX6610-48P". For non-stacking device it will be
empty
varchar 64
IMAGE_VERSION Image version of the unit in the stack. For
non-stacking device it will be always empty.
varchar
UNIT_ROLE Indicates unit role in the stack. Possible values: 1 -
other, 2 - active, 3 - standby, 4 - member, 5 -
standalone. For non-stacking device it will be always
-1'
int
UNIT_PRIORITY Indicates unit priority. Possible values 0 to 255. For
non-stacking device it will be always -1
int
UNIT_STATE Used to identify unit state in the stack. Possible
values: 1 - local, 2 - remote, 3 - reserved, 4 - empty.
For non-stacking device it will be always -1
int