Brocade Network Advisor 12.1.X Documentation Updates (53-1003016-05, January 2014)

1458 Brocade Network Advisor SAN User Manual
53-1002948-01
Database tables and fields
H
RATE_LIMITED Denotes if the port has Rate Limiting Enabled. smallint
QOS_CAPABLE Indicates if the port is QOS capable. smallint
QOS_ENABLED Indicates if the port is QOS enabled. smallint
TUNNEL_CONFIGURED Denotes if the port has a fcip tunnel configured. smallint
FCIP_TUNNEL_UP Denotes if the fcip tunnel that is configured is up. smallint
FCR_FABRIC_ID Stores the FCR fabric ID. Applicable if the port is
configured as an EX port.
smallint
FCR_INTEROP_MODE The interop mode of the FCR fabric. Applicable if the
port is an EX port.
smallint
CALCULATED_STATUS The calculated status of the port. Eg. Healthy, Down,
Marginal etc.
varchar 64
USER_DEFINED_VALUE1 User defined value used for annotation. varchar 256
USER_DEFINED_VALUE2 User defined value used for annotation. varchar 256
USER_DEFINED_VALUE3 User defined value used for annotation. varchar 256
KIND Stores the port kind from the NVP portKind. varchar 32
STATE The state of the port whether it is online or offline varchar 64
PREVIOUS_STATUS This table can hold the same values as STATUS
column. But this will be holding the previous status of
the PORT. These values to be populated by switch
asset collector.
varchar 64
AUTO_DISABLE_CONFIGUR
ED
To represent auto disable configuration state (set by
user).
Default value is 0.
smallint
AUTO_DISABLED To represent auto disabled status (set by switch).
Default value is 0.
smallint
OCCUPIED Default value is 0. smallint
LAST_UPDATE Last update time stored as long value. Elapsed time
from 1970 in milliseconds.
bigint
PORT_BIT_MASK F-Port trunk bit mask value.
Default value is 0.
int
LOGICAL_PORT_NUMBER F-Port trunk logical port number.
Default value is -1.
smallint
DEFAULT_AREA_ID Default Area id of F-Port trunk port.
Default value is -1.
smallint
LOGICAL_PORT_WWN Logical port WWN of F-Port trunk group. char 23
PREVIOUS_TYPE This fields copies the old state of the port type. The
field could be used to track the state change
information for the switch port type.
SwitchAssetCollector sets this field during the
collection time. SMIA requested this information but
could be used by any module which needs to track
the type state change.
varchar 16
TABLE 361 SWITCH_PORT (Continued)
Field Definition Format Size