Brocade Network Advisor 12.1.X Documentation Updates (53-1003016-05, January 2014)

Brocade Network Advisor 12.1.X Documentation Updates 17
53-1003016-05
Chapter 28, Image Repository for IP Products
3
Chapter 28, Image Repository for IP Products
In the section “Obtaining software files,” on page 851, modify the third paragraph as follows:
You can obtain copies of software files by downloading them from the Knowledge Portal
(kp.brocade.com).
Chapter 32, Global Server Load Balancing
In the section “Adding a host to a zone,” on page 977, modify the second bullet point under step 1
as follows:
• ftp.brocade.com
Appendix A, Application menus
In the section “IP shortcut menus,” on page 1306, under the IronWare device, DCB, VCS/VDX, and
Third-party device components modify the Network Objects content and add L2 Topology content
as follows:
Appendix E, Device Properties
In the section “Viewing IP device and port properties,” on page 1355, under the AP tab area Make
the following changes:
Appendix G, CLI Templates
Replace with this new appendix: Appendix G, “CLI Templates”.
Component Menu/Submenu
Commands
Comments
Network Objects Displays the Network Objects view with the selected device
highlighted.
L2 Topology Displays the L2 Topology view with the selected device
highlighted.
Field/Component Description
Access Points tab Select to display information about access points (AP) connected to the device.
Controller /Port IP address of the controller or switch connected to the AP. Also displays the port
number if the AP is directly connected.
Connected switch
/ Port
AP profile name.