Brocade Network Advisor 12.1.X Documentation Updates (53-1003016-05, January 2014)

1518 Brocade Network Advisor SAN User Manual
53-1002948-01
Views
H
on DEPLOYMENT_CONFIGURATION.ID =
DEPLOYMENT_STATUS.DEPLOYMENT_CONFIGURATION_ID
left outer join DEPLOYMENT_REPORT_TEMPLATE on
DEPLOYMENT_REPORT_TEMPLATE.DEPLOYMENT_HANDLER_ID = DEPLOYMENT_HANDLER.ID;
DEVICE_CONNECTION_INFO
CREATE VIEW device_connection_info AS
select
DEVICE_CONNECTION.ID,
DEVICE_CONNECTION.FABRIC_ID,
DEVICE_CONNECTION.DEVICE_PORT_ID,
DEVICE_CONNECTION.SWITCH_PORT_ID,
DEVICE_CONNECTION.AG_PORT_ID,
COALESCE(DEVICE_ENCLOSURE_MEMBER.ENCLOSURE_ID, HBA.HOST_ID) as
DEVICE_ENCLOSURE_ID,
DEVICE_CONNECTION.CREATION_TIME,
DEVICE_CONNECTION.LAST_UPDATED_TIME,
DEVICE_PORT.NODE_ID,
DEVICE_CONNECTION.MISSING,
DEVICE_CONNECTION.MISSING_TIME,
SWPORT.VIRTUAL_SWITCH_ID,
DEVICE_CONNECTION.TRUSTED,
AGPORT.VIRTUAL_SWITCH_ID as AG_SWITCH_ID,
DEVICE_PORT.WWN as DEVICE_PORT_WWN,
COALESCE(USERDEFINEDDETAILS.TYPE, DN.TYPE) as DEVICE_TYPE
from DEVICE_CONNECTION
left join DEVICE_PORT on DEVICE_CONNECTION.DEVICE_PORT_ID = DEVICE_PORT.ID
left join SWITCH_PORT SWPORT on DEVICE_CONNECTION.SWITCH_PORT_ID = SWPORT.ID
left join SWITCH_PORT AGPORT on DEVICE_CONNECTION.AG_PORT_ID = AGPORT.ID
left join HBA_PORT_DEVICE_PORT_MAP on DEVICE_PORT.ID =
HBA_PORT_DEVICE_PORT_MAP.DEVICE_PORT_ID
left join HBA_PORT on HBA_PORT_DEVICE_PORT_MAP.HBA_PORT_ID =
HBA_PORT.DEVICE_PORT_ID
left join HBA on HBA_PORT.HBA_ID = HBA.ID
left join DEVICE_ENCLOSURE_MEMBER on DEVICE_PORT.ID =
DEVICE_ENCLOSURE_MEMBER.DEVICE_PORT_ID
left join DEVICE_NODE DN on DEVICE_PORT.NODE_ID = DN.ID
left join USER_DEFINED_DEVICE_DETAIL USERDEFINEDDETAILS on DN.WWN =
USERDEFINEDDETAILS.WWN;
EE_MONITOR_STATS_5MIN_INFO
create or replace view EE_MONITOR_STATS_5MIN_INFO as
select VIRTUAL_SWITCH.ID as VIRTUAL_SWITCH_ID,
ME_ID,
TARGET_ID as EE_MONITOR_ID,
timestamp with time zone 'epoch' + TIME_IN_SECONDS * interval '1 second' as
CREATION_TIME,
sum(case when MEASURE_ID = 208 then value else 0 end) as TX_UTILIZATION,
sum(case when MEASURE_ID = 209 then value else 0 end) as RX_UTILIZATION,
sum(case when MEASURE_ID = 210 then value else 0 end) as CRC_ERRORS
from TIME_SERIES_DATA_1, VIRTUAL_SWITCH
where ME_ID = MANAGED_ELEMENT_ID and COLLECTOR_ID = 16
group by ME_ID, TARGET_TYPE, TARGET_ID, TIME_IN_SECONDS,VIRTUAL_SWITCH_ID order
by TIME_IN_SECONDS desc;