Brocade Network Advisor 12.1.X Documentation Updates (53-1003016-05, January 2014)

Brocade Network Advisor 12.1.X Documentation Updates 19
53-1003016-05
Chapter
4
Brocade Network Advisor Installation and Migration Guide
In this chapter
The updates in this chapter are for the Brocade Network Advisor Installation and Migration Guide,
part number: 53-1002950-01, published August 2012.
•Chapter 1, Network Advisor Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . 19
•Appendix A, References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Chapter 1, Network Advisor Configuration
In the section, “Configuring Network Advisor,” on page 22 (step 11) and page 23 (step 12), replace
the second note with the following:
NOTE
SAN with SMI Agent + IP edition is not supported on 32-bit operating systems.
In the section, “Launching a remote client,” on page 24, add the following note:
NOTE
For higher performance, use a 64-bit JRE.
Appendix A, References
In the section, “Scalability limits,” on page 75, replace Table 36 (Enterprise-supported limits by
SAN size) with the following table:
Table 36 summarizes the SAN scalability limits for support with Network Advisor Enterprise edition.
TABLE 36 Enterprise-supported limits by SAN size
Small Medium Large
Number of Fabrics 8 16 36
Number of Switches and Access Gateways 40 90 200
Number of Switch Ports 2000 5000 9000
Number of Device Ports 5000 10000 20000
Performance Monitoring Polling 5 minutes 5 minutes 5 minutes