Brocade Network Advisor 12.1.X Documentation Updates (53-1003016-05, January 2014)

1380 Brocade Network Advisor IP User Manual
53-1002947-01
CLI Templates
G
TABLE 1 HyperEdge – Stack Enable
Feature Description CLI Commands
HyperEdge To enable stacking mode. stack enable
TABLE 2 HyperEdge – Stack Disable
Feature Description CLI Commands
HyperEdge To disable stacking mode. stack disable
TABLE 3 HyperEdge – Stack Port Creation
Feature Description CLI Commands
HyperEdge To create stacking ports. stack unit $<STACKID|INTEGER>
stack-port $<STACKID1/SLOT/PORT|STRING>
$<STACKID2/SLOT/PORT|STRING>
TABLE 4 HyperEdge – Stack Port Deletion
Feature Description CLI Commands
HyperEdge To delete stacking ports. stack unit $<STACKID|INTEGER>
no stack-port $<STACKID1/SLOT/PORT|STRING>
$<STACKID2/SLOT/PORT|STRING>
TABLE 5 HyperEdge – Stack Trunk Creation
Feature Description CLI Commands
HyperEdge To create stacking trunks. stack unit $<STACKID|INTEGER>
stack-trunk $<SRC_STACKID/SLOT/PORT|STRING> to
$<DST_STACKID/SLOT/PORT|STRING>
TABLE 6 HyperEdge – Stack Trunk Deletion
Feature Description CLI Commands
HyperEdge To delete stacking trunks. stack unit $<STACKID|INTEGER>
no stack-trunk $<SRC_STACKID/SLOT/PORT|STRING> to
$<DST_STACKID/SLOT/PORT|STRING>
TABLE 7 HyperEdge – Peri Port Creation
Feature Description CLI Commands
HyperEdge To create peripheral ports. stack unit $<STACKID|INTEGER>
peri-port $<STACKID/SLOT/PORT|STRING>
TABLE 8 HyperEdge – Peri Port Deletion
Feature Description CLI Commands
HyperEdge To delete peripheral ports. stack unit $<STACKID|INTEGER>
no peri-port $<STACKID/SLOT/PORT|STRING>