Brocade Network Advisor 12.1.X Documentation Updates (53-1003016-05, January 2014)

Brocade Network Advisor IP User Manual 1385
53-1002947-01
CLI Templates
G
TABLE 27 Network OS – Configure Inter Frame Gap Violation Fencing
Feature Description CLI Commands
Network
OS
This template is used to configure
high threshold value to fence an
interface when Inter Frame
Gap(IFG) minimum length (typical
value is 12) violation occurs.
Possible values for timebase are
day, hour, minute and none.
threshold-monitor interface custom type Ethernet area IFG
threshold timebase $<Timebase|STRING> high-threshold
$<HighThresholdValue|INTEGER>
threshold-monitor interface custom type Ethernet area IFG
alert above highthresh-action fence
threshold-monitor interface apply custom-monitoring
TABLE 28 Network OS – Configure Inter Frame Gap Violation Monitor
Feature Description CLI Commands
Network OS This template is used to configure
threshold and alert values for Inter
Frame Gap(IFG) minimum length
(typical value is 12) Violation
monitoring.
Possible values for timebase are
day, hour, minute and none.
Buffer value cannot be more than
average of high plus low threshold.
Supported Values for High and
Low Threshold Action Parameters
are email, raslog, all, and none.
threshold-monitor interface custom type Ethernet area IFG
threshold timebase $<Timebase|STRING> high-threshold
$<HighThresholdValue|INTEGER> low-threshold
$<LowThresholdValue|INTEGER> buffer
$<BufferValue|INTEGER>
threshold-monitor interface custom type Ethernet area IFG
alert above highthresh-action
$<AboveHighThreshAction|STRING> lowthresh-action
$<AboveLowThreshAction|STRING>
threshold-monitor interface custom type Ethernet area IFG
alert below highthresh-action
$<BelowHighThreshAction|STRING> lowthresh-action
$<BelowLowThreshAction|STRING>
threshold-monitor interface apply custom-monitoring
TABLE 29 Network OS – Configure RX Missing Terminations Characters Monitor
Feature Description CLI Commands
Network OS This template is used to configure
threshold and alert values for RX
Missing Termination Characters
monitoring.
Possible values for timebase are
day, hour, minute and none.
Buffer value cannot be more than
average of high plus low threshold.
Supported Values for High and Low
Threshold Action Parameters are
email, raslog, all, and none.
threshold-monitor interface custom type Ethernet area
AbnormalFrameTerminations threshold timebase
$<Timebase|STRING> high-threshold
$<HighThresholdValue|INTEGER> low-threshold
$<LowThresholdValue|INTEGER> buffer
$<BufferValue|INTEGER>
threshold-monitor interface custom type Ethernet area
AbnormalFrameTerminations alert above highthresh-action
$<AboveHighThreshAction|STRING> lowthresh-action
$<AboveLowThreshAction|STRING>
threshold-monitor interface custom type Ethernet area
AbnormalFrameTerminations alert below highthresh-action
$<BelowHighThreshAction|STRING> lowthresh-action
$<BelowLowThreshAction|STRING>
threshold-monitor interface apply custom-monitoring