Converged Enhanced Ethernet Administrator's Guide v6.4.0 (53-1001761-01, June 2010)

108 Converged Enhanced Ethernet Administrator’s Guide
53-1001761-01
Converged Enhanced Ethernet map configuration
9
DRAFT: BROCADE CONFIDENTIAL
Example of defining a CEE map with a Priority Group Table.
switch:admin>cmsh
switch>enable
switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#cee-map test
switch(config-ceemap)#priority-group-table 0 weight 50 pfc
switch(config-ceemap)#priority-group-table 1 weight 50
switch(config-ceemap)#exit
switch(config)#end
5. Enter the copy command to save the running-config file to the startup-config file.
switch#copy running-config startup-config
Defining a priority-table map
Perform the following steps from Privileged EXEC mode define a priority-table map.
1. Enter global configuration mode.
switch#configure terminal
2. Specify the name of the CEE map to define. In this example ‘test’ is used.
switch(config)#cee-map test
3. Define the map.
switch(config-ceemap)#priority-table 1 1 1 0 1 1 1 15.0
Example of defining a CEE map with a Priority-to-Priority Group Table
switch:admin>cmsh
switch>enable
switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#cee-map test
switch(config-ceemap)#priority-table 1 1 1 0 1 1 1 1
PGID PG% PFC Description
15.0 - N IPC
050YSAN
150NLAN
Priority PGID
01
11
21
30
41
51
61
715