Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(1b) (OL-17675-02, October 2008)

Send documentation comments to [e-mail]
12
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(1b)
OL-17675-02
Migrating from Supervisor-1 Modules to Supervisor-2 Modules
Migrating from Supervisor-1 Modules to Supervisor-2 Modules
As of Cisco MDS SAN-OS Release 3.0(1), the Cisco MDS 9509 and 9506 Directors support both
Supervisor-1 and Supervisor-2 modules. Supervisor-1 and Supervisor-2 modules cannot be installed in
the same switch, except during migration. Both the active and standby supervisor modules must be of
the same type, either Supervisor-1 or Supervisor-2 modules. For Cisco MDS 9513 Directors, both
supervisor modules must be Supervisor-2 modules.
Caution Migrating your supervisor modules is a disruptive operation.
Note Migrating from Supervisor-2 modules to Supervisor-1 modules is not supported.
To migrate from a Supervisor-1 module to a Supervisor-2 module, refer to the step-by-step instructions
in the Cisco MDS 9000 Family CLI Configuration Guide.
DS-X9112 12-port 4-Gbps Fibre Channel Switching
Module
Yes Ye s Yes Ye s No
DS-X9124 24-port 4-Gbps Fibre Channel Switching
Module
Yes Ye s Yes Ye s No
DS-X9148 48-port 4-Gbps Fibre Channel Switching
Module
Yes Ye s Yes Ye s No
DS-X9704 4-port 10-Gbps Fibre Channel Switching
Module
Yes Ye s Yes Ye s No
DS-X9302-14K9 14/2-port Multiprotocol Services
(MPS-14/2) Module
Yes N o Yes Yes Yes
DS-X9016 16-port 1-, 2-Gbps Fibre Channel Switching
Module
Yes N o Yes Yes Yes
DS-X9032 32-port 1-, 2-Gbps Fibre Channel Switching
Module
Yes N o Yes Yes Yes
DS-X9032-SSM 32-port Storage Services Module (SSM) Yes Yes Yes Yes Yes
DS-X9308-SMIP 8-port 1-, 2-Gbps IP Switching Module Yes No Yes Yes Yes
DS-X9304-SMIP 4-port 1-, 2-Gbps IP Switching Module Yes Yes Yes Yes Yes
Table 6 Module Support Matrix for Cisco MDS SAN-OS 3.x (continued)
Module Description
MDS 9500
Series
MDS
9222i
MDS
9216i
MDS
9216A
MDS
9216