Cisco MDS 9200 Series Hardware Installation Guide (OL-16188-01, April 2008)

B-4

Cisco MDS 9200 Series Hardware Installation Guide

OL-16188-01

Appendix B Technical Specifications

Power Specifications

This section includes the following topics:

• Specifications for the Cisco MDS 9200 Series Power Supplies, page B-4

• Component Power Requirements and Heat Dissipation Specifications, page B-5

Specifications for the Cisco MDS 9200 Series Power Supplies

Table B-6 lists the specifications for the Cisco MDS 9200 Series power supply, which is 845 W and

accepts AC input.

CSM 11.5 lb (5.2 kg)

ASM 11 lb (5 kg)

IPS-8 10 lb (4.5 kg)

IPS-4 9 lb (4.1 kg)

MSM-18/4 8.5 lb (3.86 kg)

MSFM-18/4 8.5 lb (3.86 kg)

MPS-14/2 10 lb (4.5 kg)

Supervisor-2 for MDS 9500 Series 7.25 lb (kg)

Supervisor-1 for MDS 9500 Series 9 lb (4.1 kg)

Supervisor for MDS 9200 Series 9 lb (4.1 kg)

Module blank panels 0.50 lb (0.25 kg)

Table B-5 Weight of Modules in the Cisco MDS 9000 Family (continued)

Module Weight

Table B-6 Specifications for the Cisco MDS 9200 Series Power Supply

Description Specification

1. Autoranging input with power factor corrector

Voltage 100 to 240 VAC (±10%)

Current rating 12 A at 100 to 120 VAC

5 A at 200 to 240 VAC

Frequency 50/60 Hz (nominal) (±3 Hz for full range)

Output capacity 845 W

Output voltage +3.3 V at 10 A

+50 V at 16.2 A