Cisco MDS 9200 Series Hardware Installation Guide (OL-16188-01, April 2008)

B-11
Cisco MDS 9200 Series Hardware Installation Guide
OL-16188-01
Appendix B Technical Specifications
SFP Transceiver Specifications
Environmental and Power Requirement for Cisco 4-Gbps Fibre Channel SFP Transceivers
Table B-18 provides the power specification for the Cisco 4-Gbps Fibre Channel SFP transceivers.
Table B-19 provides the environment specification for the Cisco 4-Gbps Fibre Channel SFP transceivers.
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance
and Safety Information for the Cisco MDS 9000 Family.
Table B-18 Power Requirement Specification for Cisco 4-Gbps Fibre Channel SFP Transceivers
SFP
Average Transmit
Power (dBm)
Average Receive
Power (dBm)
Fiber Loss Budget
(dBm)
Maximum Minimum Maximum Minimum
DS-SFP-FC4G-SW -1.2 -9 0 – 1.78 (62.5 micron),
2.06 (50 micron -
OM2), 4.48 (50
micron - OM3)
DS-SFP-FC4G-MR -3 -11.2 -1 – 4.8
DS-SFP-FC4G-LW -3 -8.4 -1.0 – 7.8
Table B-19 Environmental Specifications for Cisco 4-Gbps Fibre Channel SFP Transceivers
SFP
Operating Storage
Maximum Minimum Maximum Minimum
DS-SFP-FC4G-SW 40°C 0°C 85°C -40°C
DS-SFP-FC4G-MR 40°C 0°C 85°C -40°C
DS-SFP-FC4G-LW 40°C 0°C 85°C -40°C