Cisco MDS 9200 Series Hardware Installation Guide (OL-16188-01, April 2008)

B-13
Cisco MDS 9200 Series Hardware Installation Guide
OL-16188-01
Appendix B Technical Specifications
SFP Transceiver Specifications
Maximum Environmental and Electrical Ratings for Cisco Fibre Channel SFP Transceivers
Table B-23 provides the maximum environmental and electrical ratings for Cisco Fibre Channel SFP
transceivers.
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance
and Safety Information for the Cisco MDS 9000 Family.
Cisco Fibre Channel/Gigabit Ethernet Transceivers
Table B-24 lists the combination Fibre Channel/Gigabit Ethernet SFP transceivers.
Table B-23 Maximum Environmental and Electrical Ratings for Cisco Fibre Channel SFP
Transceivers
Parameter
1
1. Do not operate outside the recommended operating conditions. Device reliability may be affected and damage to the
device may occur over an extended period of time.
Symbol Min. Max.
2
2. Absolute maximum ratings are those values beyond which damage to the device may occur if these limits are
exceeded for other than a short period of time.
Unit Notes
Storage temperature T
S
-40 85 °C 1
Case temperature T
C
070°C1, 2
Relative humidity RH 5 95 % 1
Table B-24 Cisco Fibre Channel/Gigabit Ethernet SFP Transceivers
Transceiver Module
Product Number Description Type
DS-SFP-FCGE-LW 1-Gbps Ethernet and 1-Gbps/2-Gbps Fibre Channel-LW SFP,
LC
Long wavelength
DS-SFP-FCGE-SW 1-Gbps Ethernet and 1-Gbps/2-Gbps Fibre Channel-SW SFP,
LC
Short wavelength