Cisco MDS 9200 Series Hardware Installation Guide (OL-16188-01, April 2008)

Send documentation comments to [e-mail]
C-1
Cisco MDS 9200 Series Hardware Installation Guide
OL-16188-01
APPENDIX
C
Cable and Port Specifications
This appendix provides cable and port specifications, and includes the following sections:
• Cables and Adapters Provided, page C-1
• Console Port, page C-2
• COM1 Port, page C-3
• MGMT 10/100/1000 Ethernet Port, page C-5
• MGMT 10/100 Ethernet Port, page C-6
• Supported Power Cords and Plugs, page C-8
Cables and Adapters Provided
The Cisco MDS 9500 Series accessory kit includes the following items:
• RJ-45 rollover cable
• DB-9F/RJ-45F PC—RJ-45 to DB-9 female DTE adapter (labeled “Terminal”)
• RJ-45/DSUB F/F adapter—RJ-45 to DB-25 female DTE adapter (labeled “Terminal”)
• RJ-45/DSUB R/P adapter—RJ-45 to DB-25 male DCE adapter (labeled “Modem”)
Note Additional cables and adapters can be ordered from your customer service representative.
Note If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased
support directly from Cisco Systems, contact Cisco Technical Support at this URL:
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtm