Cisco MDS 9200 Series Hardware Installation Guide (OL-16188-01, April 2008)

Index
IN-6
Cisco MDS 9200 Series Hardware Installation Guide
OL-16188-01
SSM
description
1-26
figure 1-26
starting up the switch 2-26
supervisor modules
Cisco MDS 9216A
1-7
Cisco MDS 9216i 1-7
installing 2-28
LEDs (table) 1-9
power and heat specification B-5
removing 2-31, 2-32
specifications B-2
switching modules
12-port 4-Gbps Fibre Channel switching
modules
1-14
16-port 2-Gbps Fibre Channel (figure) 1-17
24-port 4-Gbps Fibre Channel switching
modules
1-14
32-port 1-Gbps/2-Gbps Fibre Channel (figure) 1-17
48-port 4-Gbps Fibre Channel switching
modules
1-13
4-port 10-Gbps Fibre Channel switching
modules
1-15
description 1-12
downloading binary image 1-27
features 1-18
installing (procedure) 2-33
LEDs (table) 1-16, 1-19
positioning in chassis (figure) 2-30
power and heat specification B-5
removing 2-31, 2-32
removing (procedure) 2-32
specifications B-2
verifying installation 2-34
switch specifications (table) B-1
system grounding 2-19
T
Table B-1
telco racks (requirements) A-4
transceivers, supported SFPs. See SFP transceivers
W
weight of modules (table) B-3
X
X2 transceivers
description
1-35, B-6
figure 3-7
installing 3-8
removing 3-8
supported (table) B-7