Cisco MDS 9200 Series Hardware Installation Guide (OL-16188-01, April 2008)

2-6
Cisco MDS 9200 Series Hardware Installation Guide
OL-16188-01
Chapter 2 Installing the Cisco MDS 9200 Series
Installing the Chassis in a Cabinet or Rack
To install the switch in a cabinet or rack using the rack-mount kit provided with the switch, follow these
steps:
Step 1 Install the front rack-mount brackets as follows:
a. Position a front rack-mount bracket against the chassis and align the screw holes as shown in
Figure 2-1. Then attach the front rack-mount bracket to the chassis with six of the M4 screws.
b. Repeat with the other front rack-mount bracket on the other side of the switch.
Figure 2-1 Attaching Front Rack-Mount Bracket to the Cisco MDS 9200 Series
2C brackets
6 12-24 x 3/4-inch Phillips binder-head screws
6 10-32 x 3/4-inch Phillips binder-head screws
4 M4 x 6-mm, Phillips countersunk screws
Table 2-1 Contents of Cisco MDS 9200 Series Rack-Mount Kit (continued)
Quantity Part Description
1 Front rack-mount
bracket
2 Screws, M4
116891
MDS 9216i
G
E
1
L
I
N
K
G
E
2
L
I
N
K
5
6
7
8
9
1
0
1
1
1
2
1
3
1
4
1
2
3
4
1
2