Cisco MDS 9200 Series Hardware Installation Guide (OL-16188-01, April 2008)

Contents

vii

Cisco MDS 9200 Series Hardware Installation Guide

OL-16188-01

Environmental and Power Requirement Specifications for Cisco Fibre Channel/Gigabit Ethernet

SFP Transceivers

B-14

Cisco CWDM SFP Transceivers B-15

Environmental and Optical Specifications for Cisco 2-Gbps CWDM SFP Transceivers B-16

Environmental and Optical Specifications for Cisco 4-Gbps CWDM SFP Transceivers B-18

Cisco CWDM OADMs B-19

Cisco CWDM OADM Comparison B-19

Environmental and Power Requirement Specifications for Cisco CWDM OADMs B-20

Cisco Gigabit Ethernet Transceivers B-20

General Specifications for Cisco Gigabit Ethernet Transceivers B-20

Environmental and Power Requirement Specifications for Cisco Gigabit Ethernet

Transceivers

B-20

DWDM Fibre Channel SFP Transceivers B-21

APPENDIX

C Cable and Port Specifications C-1

Cables and Adapters Provided C-1

Console Port C-2

Console Port Pinouts C-2

Connecting the Console Port to a Computer Using the DB-25 Adapter C-2

Connecting the Console Port to a Computer Using the DB-9 Adapter C-3

COM1 Port C-3

COM1 Port Pinouts C-4

Connecting the COM1 Port to a Modem C-4

MGMT 10/100/1000 Ethernet Port C-5

MGMT 10/100 Ethernet Port C-6

Supported Power Cords and Plugs C-8

Power Cords C-8

Supported Plugs for 6000-W AC, 2500-W AC, and 1900-W AC Power Supplies C-9

Supported Plugs for the 4000-W AC Power Supply C-11

Jumper Power Cord C-11

APPENDIX

D Site Planning and Maintenance Records D-1

Site Preparation Checklist D-1

Contact and Site Information D-3

Chassis and Module Information D-4

NDEX