Cisco Nexus 5000 Series Hardware Installation Guide (OL-15902-01, November 2008)

Send documentation comments to [e-mail]
B-4
Cisco Nexus 5000 Series Hardware Installation Guide
OL-15902-01
Appendix B Technical Specifications
Transceiver Specifications
Transceiver Specifications
Table B-8 lists general specifications for the 10-Gigabit Ethernet SFP+ transceiver module.
Environmental Conditions and Power Requirement Specifications for SFP+
Transceivers
Table B-9 lists the environmental conditions and power requirement specifications for the 10-Gigabit
Ethernet SFP+ transceiver module.
General Specifications for Cisco Fibre Channel SFP Transceivers
Table B-10 lists the general specifications for Cisco Fibre Channel SFP transceivers at 4 Gbps.
Power supply warning events where
the power supply continues to operate
(high temperature, high power, and
slow fan)
Off 1 Hz blinking
AC present / 3.3 voltage standby
(VSB) on, and power supply unit off
1 Hz blinking Off
Power supply On and OK On Off
Table B-7 Power Supply LED Indicators
Condition Power LED Status (Green) Fail LED Status (Amber)
Ta b l e B-8 General Specifications for the 10-Gigabit Ethernet SFP+ Transceiver Module
Description Short Range
Connector type LC
Wavelength 850 nm
Core size 50 microns 62.5 microns
Cable distance 300 m 33 m
Ta b l e B-9 Environmental Conditions and Power Requirement Specifications for the 10-Gigabit
Ethernet SFP+ Transceiver Module
Parameter Symbol Min. Max. Unit
Storage temperature T
S
-40 ºC
Case temperature T
C
0 70 ºC
Relative humidity RH
Module supply voltage V
CC
T,R 3.1 3.5 V