HP Storage Essentials V5.1 CLI Guide First Edition (T4283-96029, August 2006)

CLI Commands82
• appiqcreate - Creates a zone set.
• appiqactivate - Activates a zone set.
• appiqdelete - Deletes a zone set.
• appiqadd - Adds a specified zone to a zone set.
• appiqremove - Removes a zone set
appiqlist -zoneset <zoneset id>
where <zoneset id> is the zone set identifier. The zone set identifier can be obtained from
several methods, such as from the appiqlist -fabric <fabric id> -zoneset command.
Description: Lists the elements that are contained within the zone set specified.
appiqlist -zoneset <zoneset id> -zone
where <zoneset id> is the zone set identifier. The zone set identifier can be obtained from
several methods, such as from the appiqlist -fabric <fabric id> -zoneset command.
Description: Lists the zones that are contained within the zone set specified.
appiqshow -zoneset <zoneset id>
where <zoneset id> is the zone set identifier. The zone set identifier can be obtained from
several methods, such as from the appiqlist -fabric <fabric id> -zoneset command.
Description: Provides a detailed description of the specified zone set
appiqshow -zoneset <zoneset id> -zone
where <zoneset id> is the zone set identifier. The zone set identifier can be obtained from
several methods, such as from the appiqlist -fabric <fabric id> -zoneset command.
Description: Provides a detailed description of the zones that are contained within the zone set
specified.
appiqcreate -zoneset <VSAN1>:<switch1>:<zoneset> -fabric <fabric id>
-zone <zone id>
where
• <VSAN1> is the name of the virtual SAN in which you want to create the zone set.
• <switch1> is the name of the switch on which you want to create the zone set.
• <zoneset> is the name of the zone set you want to create.
• <fabric id> is the fabric identifier. The fabric identifier can be obtained from several
methods, such as from the appiqlist -fabric -all command.
• <zone id> is the zone in which you want to create the zone set.
Description: Creates a zone set in the virtual storage area network (VSAN) you specify. This
command is only for switches that use VSANs. Use the appiqcreate -zoneset
<zoneset name> -fabric <fabric id> -zone <zone id> command for switches that
do not use VSANs.