HP Storage Essentials V5.1 CLI Guide First Edition (T4283-96029, August 2006)

CLI Commands84
appiqactivate -zoneset <zoneset id>
where <zoneset id> is the zone set identifier. The zone set identifier can be obtained from
several methods, such as from the appiqlist -fabric <fabric id> -zoneset command.
Description: Activates the zone set specified by <zoneset id>. The zone set that was
previously active is automatically deactivated.
appiqadd -zoneset <zoneset id> -zone <zone id>
where
• <zoneset id> is the zone set identifier. The zone set identifier can be obtained from several
methods, such as from the appiqlist -fabric <fabric id> -zoneset command.
• <zone id> is the zone identifier. The zone identifier can be obtained from several methods,
such as from the appiqlist -fabric <fabric id> -zone command.
Description: Adds the zone to the zone set specified by <zoneset id>.
appiqremove -zoneset <zoneset id> -zone <zone id>
where
• <zoneset id> is the zone set identifier. The zone set identifier can be obtained from several
methods, such as from the appiqlist -fabric <fabric id> -zoneset command.
• <zone id> is the zone identifier. The zone identifier can be obtained from several methods,
such as from the appiqlist -zoneset <zoneset id> -zone command.
Description: Removes the zone from the specified zone set.