HP Storage Essentials V5.1 CLI Guide First Edition (T4283-96029, August 2006)

CLI Commands18
appiqshow -backup -backupmanager <ID> -policy
Description: Provides detailed description of all the backup policies configured on the backup
manager.
You can find the identifier for the backup manager through the
appiqlist -backup -backupmanager -all command.
appiqshow -backup -backupmanager <ID> -client
Description: Provides detailed description of all the backup clients associated for the backup
manager.
You can find the identifier for the backup manager through the
appiqlist -backup -backupmanager -all command.
appiqshow -backup -mediamanager <ID>
Description: Provides a detailed description of the media manager.
You can find the identifier for the media manager through the
appiqlist -backup -backupmanager <ID> -mediamanager command.
appiqshow -backup -mediamanager <ID> -tapelibrary
Description: Provides detailed description of all the tape libraries connected to the media
manager.
You can find the identifier for the media manager through the
appiqlist -backup -backupmanager <ID> -mediamanager command.
Discovery
Use the following CLI commands to perform discovery, obtain the topology and Get Details from
elements:
appiqdiscover -domaindiscovery -topology [-sync]” on page 18
appiqdiscover -domaindiscovery -details -backup” on page 19
appiqdiscover -domaindiscovery -details -all” on page 19
appiqdiscover -domaindiscovery -details -stop” on page 19
appiqdiscover -domaindiscovery -refresh -host <host id>” on page 19
appiqdiscover -domaindiscovery -refresh -switch <switch id> on page 19
appiqdiscover -domaindiscovery -refresh -storagesystem <storage system id>” on page 19
appiqdiscover -domaindiscovery -topology [-sync]
Description: This command obtains the topology. It assumes you have already performed a
discovery. The [-sync] flag is optional. If you specify the –sync flag, the command will be in
synchronous mode, meaning the management server will not accept new commands until it is done
with obtaining the topology.