HP Storage Essentials V5.1 CLI Guide First Edition (T4283-96029, August 2006)

CLI Commands58
appiqshow -pool <pool id>
Description: Provides a detailed description of pool. The pool ID can be obtained from several
methods, such as from the appiqlist -device -storagesystem <storage system id>
-pool command.
appiqshow -pool <pool id> -storagesetting
Description: Provides a detailed list of storage settings for this pool.
Keep in mind the following:
• For a parent pool (unconfigured pool), these settings are used in the creation of a pool.
• For a non-parent pool, these settings are used in volume creation.
The pool ID can be obtained from several methods, such as from the appiqlist -device
-storagesystem <storage system id> -pool command.
appiqshow -pool <pool id> - storageextent
Description: Provides a detailed description of storage extents on the pool specified. The pool ID
can be obtained from several methods, such as from the appiqlist -device
-storagesystem <storage system id> -pool command.
The pool ID can be obtained from several methods, such as from the appiqlist -device
-storagesystem <storage system id> -pool command.
appiqshow -pool <pool id> -volume
Description: Provides a detailed description of volumes on the pool specified.
The pool ID can be obtained from several methods, such as from the appiqlist -device
-storagesystem <storage system id> -pool command.
appiqcreate -pool <pool id 1>…<pool id n>
-storagesetting <storage settings id> -size
<size in MB>
Description: Creates a storage pool with the specified unconfigured pools, storage setting and
size. Not all storage systems support assigning name at creation time.
Where:
• <pool id> - is an unconfigured pool ID The pool ID can be obtained from several methods,
such as from the appiqlist -device -storagesystem <storage system id>
-pool command.
• <storage setting id> - is the storage setting ID for the new pool. You can obtain the
storage setting ID from one of the following commands:
• appiqshow -device -storage system <storagesystem id> -pool
• appiqlist -pool <id> -storagesetting
• appiqshow -pool <id> -storagesetting - This command also shows supported
sizes for each of the storagesetting.