HP Storage Essentials V5.1 CLI Guide First Edition (T4283-96029, August 2006)

Storage Essentials 5.1 CLI Guide 65
appiqshow -device -storagesystem <ssid> -pool
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Provides a detailed description of the storage pools for the storage system specified.
appiqshow -device -storagesystem <ssid> -volume
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
To view volume information for HiCommand storage systems, use the AppIQShow -device
-storagesystem <ssid> -unmappedvolume and AppIQShow -device
-storagesystem <ssid> -mappedvolume commands. See the topic, ”Volumes” on page 71
for more information.
Description: Provides a detailed description of the volumes for the storage system specified.
appiqshow -device -storagesystem <ssid>
-unmappedvolume
where <ssid> is the identifier for a storage system. The storage system identifier can be found
through several methods, such as from the appiqlist -device -storagesystem -all
command.
Description: Provides a detailed description of the unmapped volumes for the storage system
specified.
appiqshow -device -storagesystem <ssid>
-mappedvolume
where <ssid> is the identifier for a storage system. The storage system identifier can be found
through several methods, such as from the appiqlist -device -storagesystem -all
command.
Description: Provides a detailed description of the mapped volumes for the storage system
specified.
appiqshow -device -storagesystem <ssid>
-storagecapability
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Provides a detailed description of the storage pool capability for the storage system
specified.
appiqshow -device -storagesystem <ssid> -drive
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Provides a detailed description of the drives for the storage system specified.