HP Storage Essentials V5.1 CLI Guide First Edition (T4283-96029, August 2006)

CLI Commands70
Description: Provide a list of all the subcomponents (port, media access device, controller cards
and changer devices) that belong to the specified tape library.
appiqlist -device -tapelibrary <library ID> -port
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.
Description: Provides a list of all fibre channel ports that belongs to the specified tape library.
appiqlist -device -tapelibrary <library ID>
-mediaaccessdevice
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.
Description: Provides a list of all media access devices that belongs to the specified tape library.
appiqlist -device -tapelibrary <library ID> -controller
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.
Description: Provides a list of all front-end controller cards that belongs to the specified tape
library.
appiqlist -device -tapelibrary <library ID>
-changerdevice
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.
Description: Provides a list of all changer devices that belongs to the specified tape library.
appiqshow -device -tapelibrary -all
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.
Description: Provide a detailed description of all the tape libraries that the management server
detects.
appiqshow -device -tapelibrary <library ID>
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.
Description: Provides a detailed description for a specified tape library.