HP Storage Essentials V5.1 CLI Guide First Edition (T4283-96029, August 2006)

CLI Commands74
appiqlist -zone <zone id> -all
where <zone id> is the zone identifier. The zone identifier can be obtained from several
methods, such as from the appiqlist -fabric <fabric id> -zone command.
Description: Provides a list of the ports, zone aliases, hosts and storage systems contained in the
zone specified.
appiqlist -zone <zone id> -host
where <zone id> is the zone identifier. The zone identifier can be obtained from several
methods, such as from the appiqlist -fabric <fabric id> --zone command.
Description: Provides a list of the hosts in the zone specified.
appiqlist -zone <zone id> -storagesystem
where <zone id> is the zone identifier. The zone identifier can be obtained from several
methods, such as from the appiqlist -fabric <fabric id> --zone command.
Description: Provides a list of the storage systems in the zone specified.
appiqlist -zone <zone id> -port
where <zone id> is the zone identifier. The zone identifier can be obtained from several
methods, such as from the appiqlist -fabric <fabric id> -zone command.
Description: Provides a list of the ports in the zone specified.
appiqlist -zone <zone id> -zonealias
where <zone id> is the zone identifier. The zone identifier can be obtained from several
methods, such as from the appiqlist -fabric <fabric id> -zone command.
Description: Provides a list of the zone aliases in the zone specified.
appiqshow -zone <zone id>
where <zone id> is the zone identifier. The zone identifier can be obtained from several
methods, such as from the appiqlist -fabric <fabric id> -zone command.
Description: Provides a detailed description of the specified zone.
appiqshow -zone <zone id> -all
where <zone id> is the zone identifier. The zone identifier can be obtained from several
methods, such as from the appiqlist -fabric <fabric id> -zone command.
Description: Provides detailed description of the ports and zone aliases contained in the zone
specified.
appiqshow -zone <zone id> -host
where <zone id> is the zone identifier. The zone identifier can be obtained from several
methods, such as from the appiqlist -fabric <fabric id> -zone command.