HP Storage Essentials V5.1 CLI Guide First Edition (T4283-96029, August 2006)

Storage Essentials 5.1 CLI Guide 75
Description: Provides detailed description of the hosts contained in the zone specified.
appiqshow -zone <zone id> -storagesystem
where <zone id> is the zone identifier. The zone identifier can be obtained from several
methods, such as from the appiqlist -fabric <fabric id> -zone command.
Description: Provides detailed description of the storage systems contained in the zone specified.
appiqshow -zone <zone id> -port
where <zone id> is the zone identifier. The zone identifier can be obtained from several
methods, such as from the appiqlist -fabric <fabric id> -zone command.
Description: Provides a detailed description of the ports in the zone specified.
appiqshow -zone <zone id> -zonealias
where <zone id> is the zone identifier. The zone identifier can be obtained from several
methods, such as from the appiqlist -fabric <fabric id> -zone command.
Description: Provides a detailed description of the zone aliases in the zone specified.
appiqcreate -zone <VSAN1>:<switch1>:<zone> -fabric <fabric id> -port
<port id>
where
• <VSAN1> is the name of the virtual SAN in which you want to create the zone alias.
• <switch1> is the name of the switch on which you want to create the zone alias.
• <zone> is the name of the zone you want to create.
• <fabric id> is the fabric identifier. The fabric identifier can be obtained from several
methods, such as from the appiqlist -fabric -all command.
• <port id> is the port identifier for a host, switch or storage system. The port identifier for a
host can be obtained from the appiqlist -device -host <id> -port command and
the port identifier for a storage system can be obtained from the appiqlist -device
-storagesystem <storage system id> -port command. The port identifier for a
switch can be obtained from the appiqlist -device -switch <switch id> -all
command.
Description: Creates a zone alias in the virtual storage area network (VSAN) you specify. This
command is only for switches that use VSANs. Use the appiqcreate -zone <zone name>
-fabric <fabric id> -port <port id> command for switches that do not use VSANs.
appiqcreate -zone <zone name> -fabric <fabric id>
-port <port id>
where
• <zone name> is the name of the zone. Make sure you do not have a zone with the same
name by entering the appiqlist -fabric <fabric id> -zone command.