HP Storage Essentials V5.1 User Guide First Edition (T4283-96026, August 2006)

Discovering NAS Devices, Tape Libraries, Switches and Storage Systems60
Engenio storage
systems
Can be discovered two ways:
• Entering the IP address/DNS
name, user name and
password of a controller for an
Engenio storage system.
Discovers only the
corresponding IP address of the
controller.
• Entering the IP address/DNS
name, user name and
password of a proxy that is
used to manage an Engenio
storage system. Discovers all
controllers known to the proxy.
See ”Discovering Engenio
Storage Systems” on page 65.
HDS storage
systems
Discover the server running
HiCommand Device Manager.
See ”Discovering HDS Storage
Systems” on page 66 for more
information.
HP storage systems Discover the server running the HP
CIMOM.
See ”Discovering HP
StorageWorks XP Arrays” on
page 70.
IBM Storage
Systems
Discover the CIMOM that talks to
the IBM storage systems you want
to monitor.
See ”Discovering IBM Storage
Systems” on page 73.
Sun StorEdge 3510 Discovered through proxy software
called Sun StorEdge™
Configuration Service. On the
discovery page the user should
enter the hostname or IP address of
the computer running the Sun
StorEdge 3510 SMI-S provider.
See ”Discovering Sun StorEdge
3510 Storage Systems” on
page 75.
Sun StorEdge 6920
and 6940
Discover the storage system
directly.
See ”Discovering Sun StorEdge
6920 and 6940 Storage
Systems” on page 77.
Sun StorEdge 6130 Discover the storage system
directly. The username does not
matter. The password matters only
for provisioning.
See ”Discovering Sun StorEdge
6130 Storage Systems” on
page 77.
Table 11 Discovery Requirements for Storage Systems, Tape Libraries & NAS Devices (continued)
Element Discovery Requirements Additional Information