HP Storage Essentials V5.00.01 installation guide (T4283-96011, January 2006)
Table Of Contents
- HP
- Storage Essentials 5.00.01 Installation Guide
- Contents
- Overview
- Installing the Management Server on Microsoft Windows
- Discovering Filers, Tape Libraries, Switches and Storage Systems
- Deploying CIM Extensions
- Installing the CIM Extension for IBM AIX
- Installing the CIM Extension for SGI ProPack for Linux
- Installing the CIM Extension for HP-UX
- Installing the CIM Extension for SUSE and Red Hat Linux
- Installing the CIM Extension for OpenVMS
- Installing the CIM Extension for HP Tru64 UNIX
- Installing the CIM Extension for SGI IRIX
- Installing the CIM Extension for Sun Solaris
- Installing the CIM Extension for Microsoft Windows
- Discovering Applications, Backup Servers and Hosts
- Managing Security
- Troubleshooting
Storage Essentials 5.00.01 Installation Guide 127
Stopping the CIM Extension
To stop the background process for the CIM Extension, enter the following at the command prompt
in the /opt/APPQcime/tools directory:
# ./stop
Keep in mind the following:
• You must have root privileges to stop the CIM Extension.
• When you stop the CIM Extension, the management server is unable to gather information
about this host.
How to Determine if the CIM Extension Is Running
You can determine if the CIM Extension is running by entering the following command at the
command prompt:
# ./status
The process for the CIM Extension is displayed.
The CIM Extension is running when a message resembling the following is displayed:
CIM Extension Running
Removing the CIM Extension from SGI ProPack for Linux
To remove the CIM Extension for SGI ProPack for Linux:
1. Go to the following directory by entering the following at the command prompt:
# cd [InstallationDirectory]/Uninstall_CIMExtensions
where InstallationDirectory is the directory containing the CIM Extension
2. Remove the CIM Extension by entering the following at the command prompt:
# ./Uninstall_SGI_CIMExtensions