HP Storage Essentials SRM 6.0 User Guide for Enterprise Edition and Standard Edition SRM Software (July 2008)
Viewing Performance Data412
• The management server only monitors the top or bottom layer of Solstice Disksuite/Volume
Manager. For example, assume you have a normal configuration for Solstice Disksuite/Volume
Manager (/folder <- d1 <- d2 <- d3 <- d4 <- cxtydzs#). The management server
reports on the folder and the highest layer, which is d1. Assume you have soft partitioning
(/folder <- d1 <- d2 <- d3 <- d4 <- cxtydzs#). The management server reports
on the folder and the lowest layer, which is d4. The management server skips all layers between
the d# devices. You are not able to monitor the middle layers, which are d2 and d3 in the
previous example.
The following table is a sample of possible configurations, not a complete list of all products in the
marketplace.
Table 57 Host Monitoring Support
Host Configuration Monitoring Supported?
AIX 5.1, 5.2 LVM Y
AIX 5.1 PowerPath Y
AIX 5.1 HDLM Y
AIX 5.3 Y
AIX 5.3 SDD N
AIX 5.3 SDDPCM N
AIX 5.2, 5.3 with AMS N
HP-UX 11.x Itanium Y
HP-UX 11i Y
HP-UX 11.0 Y
HP-UX 11i LVM Y
HP-UX 11.0 LVM Y
HP-UX 11i PV Link Y
HP-UX 11.0 PV Link Y
HP-UX 11i PV Link Volumes Y
HP-UX 11.0 PV Link Volumes Y
HP-UX 11.i with PowerPath Y
HP-UX 11.0 with PowerPath Y
HP-UX 11.0 with HDLM Y
HP-UX 11.i with HDLM Y