HP Storage Essentials SRM 6.0 User Guide for Enterprise Edition and Standard Edition SRM Software (July 2008)

Provisioning Manager548
operations. So if you want to create a LUSE volume and then perform LUN creation on the HDS box,
it is a two-step process. First, use the management server to create LUSE volumes. Then create a LUN
and map a volume to a target port, by creating a host security group. For more information, see
”Creating Host Security Groups” on page 558 and ”Rules for Creating Host Security Groups” on
page 551.
HDS ships some of its storage systems with volumes already created. When the software first
discovers an HDS storage system, it detects the volumes created by HDS. When you use the
software's “create a volume” feature, you are assigning the already-created volume. For more
information, see ”About Provisioning on HDS Storage Systems” on page 566.
LUSE made up of volumes from different RAID levels are not supported. You cannot use this product
to provision this type of LUSE. Existing LUSE of this type may be incorrectly reported.
It is not possible to extend LUSEs using the management server software. You must perform this
operation using the native tools.
NOTE: In a Hitachi Freedom Storage™ Thunder 9500™ V Series storage system, it is not possible
to create a LUSE from a group of RAID-0 LDEVs.
For LSI Storage Systems
Make sure you select a volume group that can accommodate the requested size for the new volume.
You can create volumes from existing free extent areas within a volume group.
No volume-to-LUN masking is done by default, except for CLARiiON storage systems. For more
information, see ”Creating Host Security Groups” on page 558 and ”Rules for Creating Host
Security Groups” on page 551.
Creating a Storage Volume
To create a storage volume.
1. Access the Create Storage Volume wizard by doing the following:
a. Click Tools > Storage Essentials > Provisioning Manager in HP Systems Insight Manager.
b. In the right pane, click the Storage Systems tab.
c. Click the Provision button for the storage system in which you want to access information
about volumes.
d. Click Step 2 Volume.
e. Select the desired number of LDEVs for the LUSE volume then click Delete Selected Volumes.
Take note of the array group from which you deleted the LDEVs. You need this information to
create the LUSE volume.
2. Click New Volume.