HP Storage Essentials Storage Resource Management Report Optimizer Software 6.0 Building Reports Using the Web Intelligence Java Report Panel (August 2008)

Building Reports Using the Web Intelligence Java Report Panel 281
3. Define the additional condition by specifying the appropriate Filtered object or
cell, the Operator, and the Operand(s) as you did for the first condition.
For step-by-step instructions for building conditions, see ”Step 2: defining conditions”
on page 269.
4. If you want to add another condition, click the + button below the new condition you
just added, and define the additional condition in the new row.
5. To save the alerter, click OK.
The Alerters dialog box appears. The alerter is listed.
6. To apply the alerter, verify that the check box before the alerter is checked.
The active alerter will only be applied to the parts of the report that are selected. You
can also apply the alerter to other cells on the report or to other reports in the
document. See ”Switching alerters on or off” on page 287.
7. To close the Alerters dialog box, click OK.
The alerter is applied when you view the report in Results View. If you are working in
Structure View, click the View Results button on the report panel toolbar.
Removing a condition from an alerter
To remove a condition from an alerter:
1. In Report View, click the Alerters button on the toolbar, then select the alerter you
want to edit and click Edit.
The Alerter Editor appears.
The new
condition
for the
alerter
appears
here