HP Storage Essentials Storage Resource Management Report Optimizer Software 6.0 Building Reports Using the Web Intelligence Java Report Panel (August 2008)

Building Reports Using the Web Intelligence Java Report Panel 381
In the 2D bar chart illustrated below, the X-axis includes the [Year] and [Quarter]
dimensions. Each bar on the chart shows the values for one combination of year and
quarter; for example, 2001/Q1, 2001/Q2, and so on.
When you drill on an axis value with multiple dimensions, the drilled results are filtered by
both dimensions. For example, in the chart illustrated above, if you drill down on 2001/Q1
to the next level of data for [Month], the results displayed on the drilled chart are those for
the months in Q1 of 2001.
Drilling on a chart axis with a single dimension
To drill on a chart axis with a single dimension:
1. Verify you are in Drill mode.
The Drill button is pressed in when you are working in Drill mode.
2. Place your pointer over the dimension value on which you want to drill.
3. The next step depends on whether you want to drill down, drill up, or drill by on the
dimension value:
The chart displays the value(s) for the dimension to which you drilled.
Drilling on a chart axis with multiple dimensions
To drill on a chart axis with multiple dimensions:
1. Verify you are in Drill mode.
The Drill button is pressed in when you are working in Drill mode.
2. Place your pointer over the values on which you want to drill.
If you want to... then...
drill down on the dimension
value,
click the value.
drill up on the dimension value, right-click the value, then click Drill
up.
drill by on the dimension value, right-click the value, then click Drill
by.
X-Axis