HP OpenView Storage Mirroring User Guide (360226-002, May 2004)

14 - 18
LanguagesAvailable Specifies the Storage Mirroring language support that has been installed. Do not modify this
setting. If you need to add or remove language support, use the Storage Mirroring installation
program.
LanguageSelected Specifies the language of the verification log
Values: Depends on LanguagesSupported
Default: Language used during the installation
GUI Setting: Server Properties, Logging, Verification, Language
LanguagesSupported Specifies the available languages for the verification log. Do not modify this setting. If you need to
add or remove language support, use the Storage Mirroring installation program.
LoadSourceTarget Specifies the functionality of the Storage Mirroring service
Values:(0) Neither the source nor target modules are loaded
(
1) Only the source module is loaded
(2) Only the target module is loaded
(3) Both the source and target modules are loaded
Default: 3
GUI Setting: None
This setting will not take effect until the Storage Mirroring service has been restarted.
LogAllOrphans Specifies whether orphan files are logged to the Storage Mirroring log on the target
Values:(0) Do not log the orphan files to the Storage Mirroring log on the target
(
1) Log the orphan files to the Storage Mirroring log on the target
Default: 0
GUI Setting: Connection Manager/Restoration Manager, Orphans tab, Log Orphaned Files to
Target Li st
LogDir The location of the Storage Mirroring messages/alerts, verification, and statistics log files
Values: any valid path
Default: the location where the Storage Mirroring files were installed
GUI Setting: Server Properties, Logging tab, Folder
LogFile The name of the Storage Mirroring messages/alerts log file
Values: any valid file name
Default: DTLog
GUI Setting
: None
LogMessageLevel Specifies the types of messages logged to the.dtl files
Values: (
0) No messages will be logged
(
1) Only alert messages will be logged
(
2) Alert and release messages will be logged
(
3) Alert, release, and debug messages will be logged
Default:
2
GUI Setting
: None
LoopbackID This entry is no longer used.
MaxChecksumBlocks Specifies the number of checksum values retrieved from the target
Values: any integer
Default:
32
GUI Setting
: None
Program Setting Description