HP StorageWorks Storage Mirroring scripting guide (T2558-96074, February 2008)

13 - 38
Schedule Window
Script Account
Command SCHEDULE WINDOW
Description Sets criteria to only allow transmissions during a certain period of time
Syntax
SCHEDULE <target> WINDOW <hh:mm> TO <hh:mm>
Options  target—Name of the target, an IP address on the target, or a virtual IP address Depending on the
network route Storage Mirroring uses to access the target, you may need to specify the fully
qualified domain name.
 hh:mm—Time in hour:minute format using the 24-hour clock. The first time is when the
transmission will begin and the second time is when the transmission will end.
Examples
schedule beta window 23:00 to 06:00
Notes  Establishing a transmission window by itself is not sufficient to start a transmission. You will need
to specify a start criteria.
 Target names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command SCRIPT ACCOUNT
Description Specifies the user account that will be used to run scripts
Syntax
SCRIPT ACCOUNT <machine> <username> <password> [domain]
Options  machine—Name of the machine
 username—Name of the user
 password—Password associated with the user name
 domain—If logging in using a domain account, this is the domain name. If logging in using a local
account, this is the machine name.
Examples
script account alpha administrator ********* domain
Notes  The password associated with the username cannot be blank.
 The password cannot be a Storage Mirroring keyword. These are any Storage Mirroring DTCL
command (source, target, and so on.) or any Storage Mirroring DTCL shortcut command (env,
mon, rep, and so on).
 Options that contain non-alphanumeric characters must be enclosed in quotation marks.