HP StorageWorks Storage Mirroring scripting guide (T2558-96074, February 2008)

13 - 45
Snapshot Revert
Snapshot Schedule Disable
Snapshot Schedule Display
Command SNAPSHOT REVERT
Description Revert the target to the last good automatic snapshot
Syntax
SNAPSHOT REVERT <con_id> [ON <target>]
Options  con_id—Connection ID assigned to the source/target connection
 target—Name of the target, an IP address on the target, or a virtual IP address
Examples
snapshot revert 1
Notes Target names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command SNAPSHOT SCHEDULE DISABLE
Description Disables a snapshot schedule
Syntax
SNAPSHOT SCHEDULE <con_id> DISABLE [ON <target>]
Options  con_id—Connection ID assigned to the source/target connection
 target—Name of the target, an IP address on the target, or a virtual IP address
Examples
snapshot schedule 1 disable
Notes  This command only disables the snapshot schedule for this connection so that it will not run. It
does not clear the snapshot schedule parameters.
 Target names that contain non-alphnumeric characters must be enclosed in quotation marks.
Command SNAPSHOT SCHEDULE DISPLAY
Description Displays the snapshot schedule
Syntax
SNAPSHOT SCHEDULE <con_id> DISPLAY [ON <target>]
Options  con_id—Connection ID assigned to the source/target connection
 target—Name of the target, an IP address on the target, or a virtual IP address
Examples
snapshot schedule 1 display
Notes Target names that contain non-alphanumeric characters must be enclosed in quotation marks.