HP StorageWorks Storage Mirroring scripting guide (T2558-96074, February 2008)

4 - 4
Examples  connect DataFiles to beta map exact
 connect UserData to beta map base d:\UserData\
 connect UserFiles to beta map exact orphans, compression 2
Notes
 The default settings for this command are mirror, replicate, nomonitor, and noorphans.
 The options (no)mirror, (no)replicate, (no)monitor, (no)orphans, and compression can be used in
any combination and in any order. The first option does not require a comma, but the second and
remaining options do require a comma before the option.
 Options that contain non-alphanumeric characters must be enclosed in quotation marks.
 If you are establishing a connection within a NAT or firewall environment, you will need to specify
the target using the IP address and port number (separated by a colon) of the router. For
example,
connect DataFiles to 10.10.1.57:1105 map exact.
 When scripting with this command, if a successful connection is established, the command will
return a positive number, which is the connection ID assigned to that connection.