HP StorageWorks Storage Mirroring scripting guide (T2558-96074, February 2008)

12 - 8
EnableSnapshots Specifies whether Storage Mirroring snapshot functionality is enabled
Values: 0 Storage Mirroring snapshot functionality is disabled
1 Storage Mirroring snapshot functionality is enabled
Default: 1
GUI Setting
: None
This setting only affects Storage Mirroring snapshot functionality. If this setting is disabled, other
snapshot software such as Microsoft Volume Shadow Copy will be unaffected.
EnableTaskCmd
Processing
Queues tasks inline with replication data
Values: 0 Disable task command processing
1 Enable task command processing
Default: 0
GUI Setting
: Server Properties, Setup tab, Setup Options, Enable Task Command Processing
ExtensionNumber Used by the Storage Mirroring log files.
FailbackHostname Returns the host SPN (Service Principle Name) to its original setting on failback
Values: 0 Disabled
1 Enabled
Default: 0
GUI Setting
: Failover Control Center, Monitor Settings, Active Directory, Failback Hostname
If you are using Active Directory, this option should be enabled or you may experience problems
with failback.
FailoverHostname Automatically removes the host SPN (Service Principle Name) from Active Directory on the
source
Values: 0 Disabled
1 Enabled
Default: 0
GUI Setting
: Failover Control Center, Monitor Settings, Active Directory, Failover Hostname
If you are using Active Directory, this option should be enabled or you may experience problems
with failover.
FailoverOnRoute
Failure
Determines if failover will occur when receiving a router message back from an IP address on the
network
Values: 0 Failover will not occur when receiving a destination host unreachable message
1 Failover will occur when receiving a destination host unreachable message
Default: 1
GUI Setting
: None
FCCHelpPath The path and file name to the Failover Control Center online help file
Default: C:\Program Files\StorageWorks\Storage Mirroring\online help\fcc\
wwhelp.htm
GUI Setting
: None
Do not change this value or the online help will not work.
FileAccessRetry The number of times a failed driver call will be retried by the service.
Values: 1 - 65535
Default: 10
GUI Setting
: None
Server Setting Description