HP StorageWorks Storage Mirroring scripting guide (T2558-96074, February 2008)

12 - 11
IntermediateQueue
Limit
Amount of memory, in KB, that may be allocated to the intermediate queue by the system
memory manager when MemoryAllocatorMode is set to mixed mode (
2).
Values: 512-4194304
Default:
65536
GUI Setting
: None
The Storage Mirroring service must be restarted in order for this change to take effect.
IPFailover Specifies whether or not to failover the IP addresses during failover
Values:
0 Do not failover IP addresses
1 Failover IP addresses
Default:
1
GUI Setting
: Failover Control Center, Monitor Settings, Items to Failover, IP Address(es)
LanguagesAvailable Specifies the Storage Mirroring language support that has been installed. Do not modify this
setting. If you need to add or remove language support, use the Storage Mirroring installation
program.
LanguageSelected Specifies the language of the verification log
Values: Depends on LanguagesSupported
Default: Language used during the installation
GUI Setting: Server Properties, Logging, Verification, Language
LanguagesSupported Specifies the available languages for the verification log. Do not modify this setting. If you need to
add or remove language support, use the Storage Mirroring installation program.
LastModifiedRead
Delay
Specifies the length of time, in seconds, to wait before reading the last modified file time attribute
Values: any valid integer
Default:
15
GUI Setting
: None
This option is only used if SendLastModifiedTimeOnClose is disabled
LoadSourceTarget Specifies the functionality of the Storage Mirroring service
Values:0 Neither the source nor target modules are loaded
1 Only the source module is loaded
2 Only the target module is loaded
3 Both the source and target modules are loaded
Default: 3
GUI Setting: None
This setting will not take effect until the Storage Mirroring service has been restarted.
LogAllOrphans Specifies whether orphan files are logged to the Storage Mirroring log on the target
Values:0 Do not log the orphan files to the Storage Mirroring log on the target
1 Log the orphan files to the Storage Mirroring log on the target
Default: 0
GUI Setting: Connection Manager/Restoration Manager, Orphans tab, Log Orphaned Files to
Target List
LogDir The location of the Storage Mirroring messages/alerts, verification, and statistics log files
Values: any valid path
Default: the location where the Storage Mirroring files were installed
GUI Setting: Server Properties, Logging tab, Folder
Server Setting Description