HP StorageWorks Storage Mirroring Scripting Guide (T2558-96327, April 2009)

16 - 60
Transmission Stop
Unblock All
Unload source
Command TRANSMISSION STOP
Description Stops the transmission process
Syntax
TRANSMISSION STOP <target>
Options target—Name of the target, an IP address on the target, or a virtual IP
address. Depending on the network route Storage Mirroring uses to access
the target, you may need to specify the fully qualified domain name.
Examples
transmission stop beta
Notes Target names that contain non-alphanumeric characters must be enclosed in
quotation marks.
Command UNBLOCK ALL
Description Unblocks the replication set target paths that were previously blocked. Any
process can now update data in the replication set target path.
Syntax
UNBLOCK ALL [ON <target>] | <source> [con_id] [ON <target>]
Options
 target—Name of the target, an IP address on the target, or a virtual IP
address
 source—Name of the source
 con_id—Connection ID assigned to the source/target connection
Examples
 unblock all on beta
 unblock all alpha 3 on beta
Notes Options that contain non-alphanumeric characters must be enclosed in
quotation marks.
Command UNLOAD SOURCE
Description Unloads the Storage Mirroring source module
Syntax
UNLOAD SOURCE <machine>
Options machine—Name of the machine
Examples
unload source alpha
Notes Machine names that contain non-alphanumeric characters must be enclosed
in quotation marks.