HP StorageWorks Storage Mirroring Virtual Recovery Assistant user's guide (T2558-96323, April 2009)

5 - 6
3. Password—Enter the password that is associated with the user account.
4. Storage Mirroring port—If you have changed the default port (6320) used by the Storage
Mirroring server, specify the port.
5. After all fields have been completed, click Next. A window will display the progress as the
Storage Mirroring Virtual Recovery Assistant console authenticates the virtual recovery
appliance.
Define replica virtual machine
Select the options that will configure the virtual machine that will stand in for the source server after
failover.
1. Replica virtual machine name—Use the default replica virtual machine name, or enter a new
name.
2. Map replica virtual network IP to target networks—If there are multiple target networks,
you can select the network on the target to use.
3. Number of processors—Select the number of processors for the replica virtual machine.
4. Amount of memory—Enter the amount of memory to use for the replica virtual machine.
5. When you are finished configuring the replica virtual machine, click Next.
NOTE: The Processors on the source server field displays the number of processors on
the original source server.
NOTE: The Memory on the source server field displays the amount of memory (in MB) on
the original source server.