HP StorageWorks Storage Mirroring Data Migration user's guide (T2558-96333, May 2009)

23 of 49
user intervention, when the migration mirror is complete, the status will change to
Ready for Cutover. Use this time to complete any necessary tasks. When you are
ready to complete the migration, click Cutover on the Monitor page toolbar to
complete the migration process.
Once the target server has been rebooted, it will become the source server.
Note:
Because the Windows product activation is dependent on hardware, you may
need to reactivate your Windows registration after migration. Follow the on-
screen prompts to complete the reactivation.
If your source was disconnected from the network during the cutover process,
the original job that was mirroring the data will still be active on that machine.
Do not bring that machine back on the network. If you do, the original job will
attempt to begin mirroring data again which could result in data loss. While the
machine is still disconnected from the network, stop the Storage Mirroring
service, delete the file connect.sts located in the Storage Mirroring Data
Migration installation directory, and then restart the Storage Mirroring. This will
delete the original job. After the original job is deleted, you can bring the
machine on the network if desired.