HP StorageWorks Storage Mirroring Data Migration user's guide (T2558-96333, May 2009)

33 of 49
Note:
The Select all and Deselect all buttons allow you to quickly select or
deselect all user data on your server. These buttons do not change the
selection of system state data, which is defined by Storage Mirroring Data
Migration and cannot be modified manually.
7. Specify the location on the target to store the data from the source. The location
you specify must be a full path including the volume. For example, you might enter
C: or C:\directory.
8. Click Next to continue.
9. Specify your migration shutdown options.
● Wait for user intervention before cutover—Specify if you want to perform a
manual or automatic cutover. If you select manual, Storage Mirroring Data
Migration will pause the migration process after the source data has been
mirrored to the target, which allows you time to coordinate any other tasks.
Replication will continue during this time. If you do not wait for user
intervention and cutover is automatic, Storage Mirroring Data Migration will
terminate the migration job immediately after the mirror is complete. If your
source is running applications, it is important that you select manual cutover
by enabling this user intervention option. During the manual intervention
time, you can stop your applications that are running on the source. This lets
you stop services cleanly on the source and let that final application data be
replicated and applied on the target. This helps ensure your applications will
start cleanly on the target after cutover.
● Shut down the source server—Specify if you want to shut down the source
server before the migration job is terminated.
10. At the Migration summary page, you can review the choices you have made and
you can also configure optional settings. If you need to make any changes to the
selections you made, click Back to return to the previous pages. If you want to
configure optional settings, click Configure. Once you have completed your
configuration, click Finish to start the migration.
11. Monitor the progress of the migration mirror on the Monitor page.
12. When the migration mirror has completed, the migration job is automatically
terminated, if you disabled user intervention. If you enabled user intervention,
when the migration mirror is complete, the status will change to Ready for
Cutover. Use this time to complete any necessary tasks. When you are ready to
complete the migration, click Cutover on the Monitor page toolbar to complete the
migration process and terminate the migration job.