HP StorageWorks Storage Mirroring for Linux Scripting Guide (T2558-96319, June 2009)

13 - 12
MoveOrphansDir Indicates the name of the directory where orphaned files will be moved if
MoveOrphanedFiles=
1
Values: any valid path
Default: the location where the Storage Mirroring files were installed
GUI Setting: Connection/Restoration Manager, Orphans tab, Move
Orphaned Files to following location
NetPort Port connection for TCP communications
Values:
1025 - 65535
Default: 1100
GUI Setting: Server Properties, Network tab, Interface, Service Listen Port
If you change this value, the source service must be stopped and restarted to
implement the change.
NetworkRetry Specifies the interval, in seconds, at which Storage Mirroring will attempt to
reconnect to the target
Values: any positive number
Default:
10
GUI Setting: None
NetworkStatus
Interval
This entry is no longer used.
NetworkTimeout The maximum length of time, in seconds, to wait on a network connection. If
data is not received over a network connection within the specified time limit,
the connection is closed. During idle periods, Storage Mirroring sends small
amounts of keep-alive data at an interval 1/6 of the NetworkTimeout value to
keep the socket from being inadvertently closed.
Values: any integer
Default:
120
GUI Setting: None
OpBufferMax Specifies the number of operations that can be stored in the memory queue
prior to queuing to disk.
Values:
0 There is no limit to the number of operations that can be stored in
the memory queue
any integer 1 or larger The number of operations that can be stored in the
memory queue
Default:
0
GUI Setting: None
PingFrequency Specifies, in seconds, how often a ping is sent to the source from a monitoring
target
Values:
1 - 65535
Default: 5
GUI Setting: Failover Control Center, Monitor Settings, Monitor Interval
PostFailbackScript Location on the target where the target post-failback script is located
Values: Any valid path
Default: <
null>
GUI Setting: Failover Control Center, Monitor Settings, Scripts, Target,
Post-Failback
Server Setting Description