HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96008, November 2009)

385 of 739
Statistic Description
Connection
ID
The connection ID is the incremental counter used to number each
connection established. This number is reset to one each time the
Storage Mirroring service is restarted.
Target
Name
The name of the target as it appears in the server tree in the left pane of
the Replication Console. If the server’s name is not in the server tree,
the IP address will be displayed.
Target IP
The target IP is the IP address on the target machine where the
mirroring and replication data is being transmitted.
Target Data
State
● OK—The data on the target is in a good state.
● Mirroring—The target is in the middle of a mirror process. The
data will not be in a good state until the mirror is complete.
● Mirror Required—The data on the target is not in a good state
because a remirror is required. This may be caused by an
incomplete or stopped mirror or an operation may have been
dropped on the target.
● Restore required—The data on the source and target do not
match because of a failover condition. Restore the data from the
target back to the source. If you want to discard the changes on the
target, you can remirror to resynchronize the source and target.
● Snapshot reverted—The data on the source and target do not
match because a snapshot has been applied on the target.
Restore the data from the target back to the source. If you want to
discard the changes on the target, you can remirror to
resynchronize the source and target.
Target
Status
● OK—The target machine is active and online.
● Not Loaded—The target module is not loaded on the target. (For
example, the activation code is invalid.)
● Paused—The target machine is paused by user intervention.
● Retrying—The target machine is retrying operations for the
connection.
This field may not be updated until there is source/target activity.